How to clean your iron? no worries. White marks on clothes, yellowed sole, lime deposits in the tank. No doubt, your iron needs a good cleaning! Follow our 100% natural and effective advice. We are not really fans of ironing, but if, in addition, our iron tries to put obstacles in the wheels, nothing goes! To ensure the proper functioning of your appliance, whether it is an iron or a steam generator, the best thing is to maintain it regularly with cleaning two to three times a year, depending on the hardness of your water and the frequency of use. Also, if the water in your area is particularly hard, it may be better to use deionized water. If you use tap water, then avoid letting the water stagnate in the tank so as not to create lime deposits.
Step 1: Clean the Soleplate of an Iron or a Steam Generator
Let’s start by cleaning the sole of the iron, responsible for these ugly marks on clothes, and whose holes are most certainly dirty. To do this, prepare a paste with a mixture of one tablespoon of water and 2 tablespoons of baking soda, and apply it to the entire cold!. Sole of your iron. Rub with a cloth, paying particular attention to particularly encrusted lime deposits, and use cotton swabs to clean the holes in the sole. Rinse with a damp sponge.
You can also choose to bathe your sole, in a mixture of 1 Liter of water and 2 tablespoons of citric acid. Leave it on for about an hour, then wipe the sole with a damp sponge.
Photo Credit: https://www.wonderfullywomen.com/
Step 2: Clean Your Iron or Steam Generator
We have acted on the outside of the iron, now let’s take care of its inside, just as important. Fill the tank with a mixture of both water and white vinegar, or the juice of two lemons with 1 Liter of water, and turn your appliance on in steam mode.
Wait for a little steam to come out, then turn off the iron and let sit for about an hour. For a steam generator, wait for the water to boil and release a little steam before switching it off and leaving it to act. Then empty the tank or the tub, rinse once, then iron an old towel at the highest temperature to get rid of the stubborn residues.
FAQ
How to Clean the Iron Plate?
Clean the sole of your iron using a cloth soaked in white vinegar and a pinch of fine salt. Then wipe the sole with a soft cloth or absorbent paper. To clean the holes in the steam soleplate, pass a cotton swab lightly moistened with vinegar.
How to Clean an Iron Soleplate with Baking Soda?
Clean the sole of iron with baking soda. Sprinkle a cloth moistened with baking soda. Rub the still lukewarm sole. And then wipe with a damp cloth.
How to Clean the Sole of an Iron with Toothpaste?
Place a few small nuts of toothpaste on the soleplate of the iron and spread them out. Gently rub the sole with a clean cloth, then with a slightly damp sponge, rinse the toothpaste.
How to Clean Blackened Metal Iron?
Mix wood ash and oil. Apply the paste to the blackened object and rub vigorously with a cloth. Finally, wipe the object with a clean woolen cloth. Melt gently in a double boiler, then mix graphite to give the color of steel.
How to Clean a Hoover Steam Generator?
To clean the tank of your steam generator, you must: Fill the tank of the steam generator with water to which white vinegar has been added, approximately one glass of white vinegar. Turn on the steam generator to heat it, until the water is boiling.